customer drawing 300 constitution dr menlo park, ca 94025, u.s.a. title: 1 to 1 splices crimp, soldershield splice kit, shielded cable 26 thru 12 awg, ni plated, 1 to 4 conductors unless otherwise specified dimensions are in millimeters. [inches dimensions are shown in brackets] raychem devices document no.: d-200-02xx tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics rese rves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev: f date: june 21, 2010 prepared by: unguyen cage code: 06090 eco number: eco-10-014788 scale: nts size: a sheet: 1 of 1 ? 2009-2010 tyco electronics corporation. all rights reserved. if this document is printed it becomes unc ontrolled. check for the latest revision. soldershield splice sleeve sealing sleeve crimp splice product dimensions part names primary no. awg range color code l max a ? 2.54 (0.100) ?d1 ?d2 ?d3 ?d4 d-200-0228 1 26-20 red 80.52 (3.170) 50.30 (1.970) 4.29 (0.169) 3.00 (0.118) 1. 14 (0.045) 2.79 (0.110) d-200-0229 1 20-16 blue 80.52 (3.170) 50.30 (1.970) 5.50 (0.217) 4.00 (0.157) 1. 63 (0.064) 4.00 (0.157) d-200-0230 1 16-12 yellow 80.52 (3.170) 50.30 (1.970) 6.50 (0.256) 5.00 (0.197) 2. 46 (0.097) 4.32 (0.170) d-200-0231 2 26-20 red 105.92 (4.170) 74.93 (2.950) 5.50 (0.217) 4.00 (0.157) 1. 14 (0.045) 2.16 (0.085) d-200-0232 2 18-16 blue 105.92 (4. 170) 74.93 (2.950) 6.50 (0.256) 5.00 (0.197) 1.63 (0.064) 2.79 (0.110) D-200-0233 2 14 yellow 105.92 (4.170) 74.93 (2.950) 7.50 (0.295) 6.00 (0.236) 2. 46 (0.097) 4.32 (0.170) d-200-0234 2 12 yellow 105.92 (4.170) 74.93 (2.950) 10.50 (0.413) 9.04 (0.356) 2. 46 (0.097) 4.32 (0.170) d-200-0236 3/4 22-20 red 105.92 (4.170) 74.93 (2.950) 6.50 (0.256) 5.00 (0.197) 1. 14 (0.045) 2.16 (0.085) d-200-0237 3/4 18-16 blue 105.92 (4. 170) 74.93 (2.950) 7.50 (0.295) 6.00 (0.236) 1.63 (0.064) 2.79 (0.110) d-200-0238 3/4 14-12 yellow 108.00 (4.250) 74.93 (2.950) 10. 50 (0.413) 9.04 (0.356) 2. 46 (0.097) 4.32 (0.170) d-200-0239 3/4 18-16 blue 108.00 (4.250) 74.93 (2.950) 10. 50 (0.413) 9.04 (0.356) 1. 63 (0.064) 4.32 (0.170) materials 1. soldershield splice sleeve: heat-shrinkable, transparent blue, radi ation cross-linked modified fluoropolymer, containing two environment resistant sealing rings a nd a solder impregnated, flux-coated copper-wire braid. transparent blue. solder: type sn96 per ansi j-std-006. flux: type rom1 per ansi j-std-004. 2. crimp splice (1, 2, or 4 per kit): nickel-plated copper alloy. 3. sealing splice sleeve (1, 2, or 4 per kit): heat-shri nkable, transparent blue, radiation cross-linked modified fluoropolymer, containing two environment re sistant sealing rings. transparent blue. application 1. these kits are designed to make an envi ronment-resistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and q uad cables having nickel-plated c onductors and insulations rated for 150 ? c minimum. 2. temperature rating: -55 ? c to +200 ? c. 3. for installation procedures refer to the applicab le sections of raychem pr ocess standard rcps 150-05.
|
